I do many road trips and live out of my family minivan with the seat all or mostly removed in the back. Rod storage has always been a bit of a issue. I picked up a 10' piece of 1/2 inch PVC today, cut it to length, drilled a couple holes at each end, and think I have something that will work pretty well. I added 1/2" pipe insulation to create spacers and prevent rod tips from sliding. I also fashioned wire clothes hangers into rear hanger so that rods don't necessarily have to run all the way over the front seats. I just stuck those up in the molding. Total cost is roughly $3.50. I'd be happy for suggestions or to have flaws pointed out.
Full.jpghanger.jpgNo Hangers.jpgtie.jpg
Spacers.jpg
Full.jpghanger.jpgNo Hangers.jpgtie.jpg
Spacers.jpg
Comment