If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yeah...i've made larger jigs for awhile now, but fed up with my small jigs rusting away. I had to really search to find a cheap mold for the size hooks i wanted to use
14.5 ft Sand colored Malibu X-Factor "the promise"
2010 Hobie Outback "the Gift Horse II"
Yeah...i've made larger jigs for awhile now, but fed up with my small jigs rusting away. I had to really search to find a cheap mold for the size hooks i wanted to use
I use several styles of "Do-It" molds. Each mold has multiple cavities with various hook sizes and weights. My hook sizes range from 1 to 4/0 depending on the style and weight of the jig I pour. Then comes painting and tying in the case of bucktails and jig spinners. I get a lot of enjoyment out of it. The melting process is a great way to recycle old lead sinkers and even old jigs with broken hooks.
Mark
Pasadena, MD
Slate Hobie Revolution 13 Hidden Oak Native Ultimate 12 Lizard Lick Native Ultimate FX Pro
I use several styles of "Do-It" molds. Each mold has multiple cavities with various hook sizes and weights. My hook sizes range from 1 to 4/0 depending on the style and weight of the jig I pour. Then comes painting and tying in the case of bucktails and jig spinners. I get a lot of enjoyment out of it. The melting process is a great way to recycle old lead sinkers and even old jigs with broken hooks.
Melting is always fun, but I made a big mistake a few weeks ago, Thought I would try melting down lead in a UPS battery.......not something I'd encourage. so much heat resistance material, so ingrained in the lead...was a toxic mess that resulted in no pour-able lead.
This little mold does not have all the options of the bigger "do it" molds, but it is super easy to use and so far works flawlessly.
KF
14.5 ft Sand colored Malibu X-Factor "the promise"
2010 Hobie Outback "the Gift Horse II"
Melting is always fun, but I made a big mistake a few weeks ago, Thought I would try melting down lead in a UPS battery.......not something I'd encourage. so much heat resistance material, so ingrained in the lead...was a toxic mess that resulted in no pour-able lead.
This little mold does not have all the options of the bigger "do it" molds, but it is super easy to use and so far works flawlessly.
KF
Another source of lead that evidently is not ideal for jig making is tire weights. I have never tried them because I've read that they are a harder form of lead than most jig molds require and they might not fill the cracks and crevasses of mold completely.
I've been fortunate to receive a lot of old fishing tackle lead donations from my buddies. I give them a few jigs in return and they keep me well supplied.
Another good source of lead is riprap on low tide and most fishing piers. It's amazing how much weight folks tie onto the ends of their lines and then lose their rigs in pilings or even under the deck of the pier.
Mark
Pasadena, MD
Slate Hobie Revolution 13 Hidden Oak Native Ultimate 12 Lizard Lick Native Ultimate FX Pro
Dental office films. They are lead and the dentist has to pay for them to be destroyed. I know a lot of guys that shoot black powder and this is a great source of lead for them.
I've been pouring for more than 40 years.
As an old time shop teacher, I was able to obtain a good bit of "Type metal" a Lead/Tin/ Antimony alloy that melts clean and takes detail well, when the school system shut down the print shop. It is a bit harder than "soft lead" that sinker are made from.
Too much crap and impurities with most other sources of lead. Melting this creates very noxious fumes.
Type metal is very consistent in it's melting point.
Clean type metal or linotype metal is available thru eBay.
As always:
Melt lead in an area that has adequate / lots of ventilation.
Wear long sleeves.
Do not get any water near where you are pouring (molten lead hits water and creates little explosions of molten lead splatters).
Wear eye protection
Wear protective gloves
Don't get lead anywhere near where food is prepared and don't use utensils that have been exposed to lead in food preparation.
Yeah, "type metal" is also nice and shiny......Years ago I had a sinker supplier (I worked at a marine supply) who "mined" his led at a skeet/trap range (several in fact). It was also very shiny
14.5 ft Sand colored Malibu X-Factor "the promise"
2010 Hobie Outback "the Gift Horse II"
Comment