Calling all Machinists

[Memory Maker]

Are there any Machinists here that can help me ......... I'm more than willing to pay or trade tackle/rodmaking/luremaking supplies ...... whatever you want. I need a grove/cutout cut in ti some aluminium and a couple of holes drilled and tapped for making some rod supports for a rod wrapper I bought. It is a Dale Clemmens wrapper ........ a classic and was fortunate enough to find some of the stock that is used for the bases and support for the rod support ....... just need to get the bases milled.

Thanks in advance

[Jaspratt]

What kind of groove do you need done? A slot? Or a dove tail type of groove. I can do it. Better let me know quick because im bout to relocate my mill to a bigger garage. Do you have exact measurments of everything?

[Memory Maker]

Yep ......... I have 1 of the rod supports that you can copy. It's a slot about 1/8 " deep the width the support and about 3/4 - 1" long with a screw hole in it. The support slides in the slot and is screwed down tight ..........

Where are you at so I can bring it over .......... I'm off on Friday and all weekend or any evening ......... I work at Social Security so I could bring it over after 6 any evening

[Jaspratt]

I work nightshift so we can work something out either friday when your off or shoot for saturday morning. If you could, the base that i will be duplicating, bring the original too so i can take measurements off it so nothing will be off.

[Jaspratt]

Forgot to mention, im located around glen burnie area